BOSS 2000

BOSS 2000 is a dual-wall corrugated HDPE drainage pipe with a smooth inner wall to offer superior hydraulic performance for both storm sewers and culvert applications, ranging from diameters of 100mm to 900mm.

BOSS 2000 is offered in two product lines:

• Municipal and highway storm sewer and culverts: 320kPa stiffness; certified to CSA B182.8 with the CSA logo; 6m lengths; bell and gasket joints
• Resource road culverts: 210kPa – 260kPa stiffness; conforming to CSA B182.8 (no CSA logo); 9.5m lengths; plain ends

The pipe wall can also be factory perforated and fitting with a woven geotextile sock for use in subdrain or recharge drainage applications.

A wide variety of fabricated fittings certified to CSA B182.8 are available, as well as fittings necessary to tie in PVC pipe, such as Inserta-tees and SDR adapters.

Product Features

• Impact resistant to avoid installation damage
• UV-resistant
• Abrasion resistance
• Resistant to a wide range of chemicals
• Resistant to strong acids and bases (pH range 1.25 to 14)
• Fast installation – lightweight and long lengths with fewer joints
• Quick on-site cutting – can be trimmed to length in seconds

Typical Applications

• Municipal and highway storm sewers and culverts
• Resource road culverts
• Recharge drainage systems
• Leachate collection systems
• Stormwater management
• Airport runway sewers

Specifications

Pipe Size:

• Diameters (mm) – 100, 150, 200, 250, 300, 375, 450, 525, 600, 750, 900
• Length (m) – 6m or 9.5m (resource road culverts only)

Corrugation Wall Profile:

• Solid or perforated

Manning's n Value:

• Design Manning’s n = 0.012

Couplers Available:

• External double bell snap couplers (100mm – 200mm)
• External split couplers (250mm – 900mm)
• Heat shrink sleeve

Pipe Stiffness:

• 320kPa – Municipal and highway storm sewers and culverts
• 210kPa – 260kPa – resource road culverts

Fittings:

• Fabricated fittings
• Tees
• Wyes
• Elbows
• Crosses
• Repair couplings
• Concentric reducers
• Eccentric reducers
• End caps
• Manhole adapters
• Inserta-Tees (connect between a BOSS 2000 mainline and PVC lateral)
• SDR adapters (connect between a PVC pipe and BOSS 2000)